PMMA Liquid-Applied Roofing and Waterproofing, Explained
Published November 8, 2026
What is PMMA liquid-applied roofing?
PMMA stands for polymethyl methacrylate. On the roof, it is a two-component liquid resin mixed with a catalyst, rolled out over polyester fleece, and cured in place into a seamless reinforced membrane. Manufacturers rate it rain-proof in about 30 minutes.
Johns Manville describes its PMMA system as two-component and fast-curing, combined with catalyst and scrim “to form a monolithic reinforced membrane.”
The federal guide specification UFGS 07 18 16 gets more specific. It defines the membrane as a rapid-curing, multi-component PMMA resin with embedded polyester or fleece reinforcement, and sets a nominal minimum thickness of 90 mil for the field membrane. Kemper’s Kemperol AC Speed FR lists 90 mils with its 120 fleece, so those two line up.
How fast does it cure, and why does that matter on a roof?
Speed is the main reason owners hear about PMMA. Kemper lists a 20-minute usage time, rain-proof after 30 minutes, solid to walk on after 35, overburden after 60 and completely hardened after 6 hours. Kemper also says those times are approximate and depend on air flow, humidity and temperature. WestWood says its system is rainproof in 30 minutes. Johns Manville’s application guide lists its summer-grade field resin at a 15-minute pot life, rain-proof at 30 minutes and fully cured at 3 hours, all at 68°F.
That speed cuts both ways. The same JM guide says crews should catalyze only the amount of material that can be used within 10 to 15 minutes. The catalyst quantity also changes with temperature, from 8 packets per 20 kg unit at 50°F to 68°F to 4 packets at 68°F to 95°F for summer grade. A fast cure shortens the weather window. It also leaves less time to fix a bad batch.
Where does PMMA fit, and where does it not?
This is where PMMA earns its keep. Johns Manville says liquid-applied systems suit sites with confined urban space, numerous penetrations, or limits on hot asphalt and heat welding. Its PMMA brochure specifically names plaza decks, balconies, garden roofs, small irregularly shaped roofs and roofs with many penetrations.
Detail work is another strong fit. Kemper calls its membrane self-flashing and says inverted applications need no seams or termination bars. WestWood’s system guide describes WePly, SBS-modified bitumen membranes designed to work with its PMMA liquid systems.
But you still need a sound substrate. Johns Manville’s guide says PMMA must not go over soft or scaling brick or masonry, faulty mortar joints, or walls with broken, damaged or leaking coping. Those defects get fixed first.
Concrete has its own rules. It must be dry and cleared of laitance, and JM recommends checking moisture by meter, plastic sheet (ASTM D4263) or a condensation check. JM requires concrete decks to be dry before its PMMA goes on.
How does it differ from other liquid systems?
PMMA is one chemistry, not the whole category. Olmeck’s Lava 20 line is a single-component polyurethane that Olmeck rates for typical full cure in 7 to 24 hours at 70°F in sunny, warm conditions. That is a different cure schedule from a membrane that is rain-proof in half an hour.
Kemper sells both types. In the Kemper technical manual, its Kemperol 2K-PUR polyurethane is suited to exterior applications where absence of odor during application is critical, while AC Speed FR is the quick-curing PMMA.
So the choice is a trade. Cure speed and cold-weather range on one side, odor and working-time control on the other. A designer who knows your building’s air intakes, tenants and schedule can make that call. A data sheet by itself can’t.
What does the NYC Building Code say?
Chapter 15 of the 2022 NYC Building Code covers liquid-applied roofing in BC 1507.15. It requires a slope designed and built to provide positive roof drainage (1507.15.1). It also says the material shall comply with ASTM C836, C957, D1227 or D3468, D6083, D6694 or D6947 (1507.15.2).
PMMA is not named in that section. So the submittal matters. You need the manufacturer’s test data and listings that show how its assembly satisfies the code for your roof.
Two other Chapter 15 rules touch every PMMA roof. BC 1504.9 requires roof coverings on roofs of 2:12 slope or less to meet an initial solar reflectance of 0.7 with thermal emittance of 0.75, or an SRI of at least 82, and Kemper lists a white version of AC Speed FR with an SRI of 108. BC 1511.1.1 says reroofs shall provide positive drainage, which matters because Johns Manville’s PMMA field resin is marketed as suitable for ponding areas but the code still wants the water to leave. Our drains, ponding and parapet flashing guide covers the drainage rules.
What should an owner ask about odor and weather?
Start with the resin grade and the odor plan, in writing. Soprema offers ALSAN RS in regular and low-odor (“LO”) versions of both field and flashing resins, and UFGS 07 18 16 requires odor control measures where needed.
Then ask for the stop rules on temperature and dew point. JM requires the substrate to be 5°F above dew point. UFGS 07 18 16 bars application below 40°F or above 95°F and when rain, dew or fog could arrive before cure.
How does PMMA connect to the warranty?
It comes back to the manufacturer’s terms, and those vary by product. Johns Manville’s PMMA brochure says both of its options, standalone and as flashing over SBS or BUR membranes, are eligible for a 20-year Peak Advantage Guarantee. Soprema says ALSAN RS systems may be warranted for up to 20 years and asks owners to contact Soprema for details.
Those are the manufacturers’ published terms, not Altius CM’s. Our warranty guide explains the exclusions to read first.
Where has Altius CM used liquid-applied systems?
At 111 Hudson Street in Manhattan, an in-progress condominium contract, the roof scope includes a new sloped roof, PMMA waterproofing at the building’s existing round skylights, counterflashing at parapet walls and allowances that include 400 SF of PMMA flashing. The project record says PMMA handles curved and detailed surfaces well, which is why it fits round skylights.
At 1251 Avenue of the Americas the roof received a reinforced fluid-applied roofing assembly across a 28,000 sq ft work area. Our case study covers the scope.
For the wider category, see our PMMA waterproofing page and flat roof systems compared.
This page cites documents from Johns Manville, Soprema, Kemper System, ALT Global (WestWood USA) and Olmeck. Citing a manufacturer’s documents does not mean that manufacturer has approved, certified or recommended Altius CM.
Altius CM installs liquid-applied systems from ALT Global (WestWood USA), Kemper System and Olmeck, along with Johns Manville, Siplast, Holcim Elevate and Soprema. This page describes what those manufacturers publish. None of them has certified or endorsed Altius CM.
Sources
- JM PMMA Field Resin and Liquid Applied Roofing Systems
- JM PMMA Liquids Application Guide (RS-2362)
- JM PMMA brochure (RS-2363)
- Kemperol AC Speed FR, Kemper System
- Kemper System America Technical Manual, 2020
- WestWood USA, Waterproofing and system reference guide
- Soprema ALSAN RS brochure
- Olmeck, Lava 20 products
- UFGS 07 18 16, Cold Liquid-Applied Reinforced PMMA Roofing (Aug. 2025)
- 2022 NYC Building Code, Chapter 15
Last verified: November 8, 2026. This is general information, not legal advice or an engineering opinion; have a registered design professional confirm system selection, code listings and substrate conditions for your roof.
Frequently asked questions
What does PMMA stand for in roofing?
Polymethyl methacrylate. In roofing it is a two-component resin that is catalyzed on site and cured in place with polyester fleece or scrim as reinforcement. Johns Manville describes its system as a two-component, fast-curing PMMA resin combined with catalyst and a non-woven scrim to form a monolithic reinforced membrane.
How fast does a PMMA roofing membrane cure?
Manufacturers publish rain-proof times of roughly 30 minutes. Kemper lists its Kemperol AC Speed FR as rain-proof after 30 minutes and ready for overburden after 60 minutes, and Johns Manville lists its summer-grade field resin as rain-proof in 30 minutes and fully cured in 3 hours at 68°F. Kemper notes its times are approximate and depend on air flow, humidity and temperature.
Does the NYC Building Code recognize liquid-applied roofing?
Yes. BC 1507.15 covers liquid-applied roofing, requires a slope designed and built for positive roof drainage, and lists ASTM C836, C957, D1227 or D3468, D6083, D6694 and D6947 as the material standards. The section does not name PMMA, so ask the manufacturer for the test reports and listings that show how its assembly satisfies the code for your roof.
Can PMMA be applied in cold or wet weather?
Only within limits. Johns Manville's application guide allows membranes from 23°F to 95°F and requires the substrate to stay at least 5°F above the dew point, and its winter-grade resin extends the range downward. The federal guide specification UFGS 07 18 16 bars application on a damp surface or when rain, dew or fog could arrive before cure.
Does PMMA have an odor?
Some do, which is why manufacturers sell low-odor versions: Soprema lists ALSAN RS 260 LO field and flashing resins, and the federal specification UFGS 07 18 16 calls for odor control measures where required. Kemper's manual says its Kemperol 2K-PUR polyurethane system is suited to exterior applications where absence of odor during application is critical.
Do PMMA roofs carry a manufacturer guarantee?
Manufacturers publish their own terms. Johns Manville's PMMA brochure says both its standalone and SBS or BUR flashing options are eligible for a 20-year Peak Advantage Guarantee, and Soprema says ALSAN RS systems may be warranted for up to 20 years (contact Soprema for details). Those are the manufacturers' terms, with conditions, and not a promise from Altius CM.